Insulated Pipe Support – Extra Heavy Bottom Jacket – A3000

Insulated Pipe Support - Extra Heavy Bottom Jacket - A3000 - Details

Request a Quote



General Dimensions & Specifications

Download PDF

Hardware Sold Separately – Note: For higher load ratings, see A5000, A9000. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, width of support surface should be at least 1/2 of dimension “A” in Table II. Divide “A” in Table II by 6 to find maximum allowable travel on pipe roll (+/- from centered position). To develop maximum load rating, use band, ring or clevis hanger with manufacturer’s load rating equal to or greater than values shown in Table I.

To obtain load ratings for operating temperatures of 500°F and higher, multiply load rating by factor “F” in Table III.

Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat loss and/or condensation
Double thickness bottom jacket for added structural strength and abrasive wear resistance
Copper tubing sizes available
Other I.D.’s and/or O.D.’s available on request
Clamps available (see G-Series)

Performance Test Results on File: Available upon request.

A3000: Applicable PSI spec. doc.: No. 205
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTMA-527
Glue: Industrial contact adhesive

Formal Submittal Sheets Available

Model A3000 is designed for use on:

  • Cold Water
  • Hot Water
  • Dual Temperature
  • Chilled Water
  • Vacuum
  • Steam
  • Gas
  • Air

Intended for Installation on:

  • Flat Surfaces
  • Pipe rolls
  • Band, ring or clevis pipe hanger

Temperature Range:

  • Standard: +40°F to +1200°F CalSil Insulation
    Note: Up to 1800°F available upon request.
  • Cryogenic: -275°F to +275°F Urethane Insulation.
    Add U after the model number (i.e., A3000U)
Pipe SizeMaximum Load Rating (lb.)
On Flat Surface (a) (c)On Pipe Roll (b) (d)In Clevis Hanger (b) (c)
1/2403545
3/4454050
1656070
1 1/4807090
1 1/2110100120
2140125155
2 1/2165150220
3200180275
3 1/2250225325
4300270375
5400See A5000475
6450575
8500800
105251100
125751300
146001500
166251700
186501900
207002100
247752400
TABLE I
Iron Pipe SizeInsulation ThicknessCopper Tubing Size O.D.
1/21/411 1/222 1/233 1/24
ABABABABABABABABAB
1/2 - 1 1/24244244244244244246246246245/8 - 1 5/8
26246246246246246246246246242 1/8
2 1/2 - 46206206206206206209209209202 5/8 - 4 1/8
56206206206209209209205 1/8
6 - 76206206206209169169166 1/8
8 - 109169169169169169168 1/8 - 10 1/8
12 - 1812161216121612161216121612 1/8
20 - 24181618161816181618161816
TABLE II "B" = gauge of sheet metal jacket (bottom jacket approx. 2 X ga. or top jacket)
Oper. Temp°FMult. Factor "F"
5000.9
7500.75
10000.5
12000.3
Table III
Top