Insulated Pipe Support – Heavy Duty for Use with Rod Hangers – A9000

Insulated Pipe Support - Heavy Duty for Use with Rod Hangers - A9000 - Details

Request A Quote



General Dimensions & Specifications

Download PDF

Hardware Sold Separately – Note: For higher load ratings, see D1000, D3000. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.

To develop maximum load rating, use band, ring or clevis hanger with manufacturer’s load rating equal to or greater than values shown in Table I.

Compact
Easy Installation
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Minimizes heat loss and/or condensation
Insulating structural inserts for load transfer
Copper tubing sizes available
Other I.D.’s and/or O.D.’s available on request

Performance Test Results on File: Available upon request.

A9000: Applicable PSI spec. doc.: No. 205
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTMA-527
Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant
Glue: Industrial contact adhesive

Formal Submittal Sheets Available

Model A9000 is designed for use on:

  • Cold Water
  • Hot Water
  • Dual Temperature
  • Chilled Water
  • Vacuum
  • Steam
  • Gas
  • Air

Intended for Installation on:

  • Band, ring or clevis pipe hangers
  • Flat Surfaces, see A7000
  • Pipe Rolls, see A8000

Temperature Range:

  • Standard: +40°F to +1200°F CalSil Insulation
    Note: Up to 1800°F available upon request.
  • Cryogenic: -275°F to +275°F Urethane Insulation.
    Add U after the model number (i.e., A9000U)
Pipe SizeMaximum Load Rating (lb.)
In Clevis Hanger (a)
1/250
3/455
180
1 1/4100
1 1/2130
2175
2 1/2250
3300
3 1/2350
4400
5550
6600
8900
101200
121450
141650
161900
182150
202400
242750
TABLE I
Iron Pipe SizeInsulation ThicknessCopper Tubing Size O.D.
1/23/411 1/222 1/233 1/24
ABABABABABABABABAB
1/2 - 1 1/24244244244244244246246246245/8 - 1 5/8
26246246246246246246246246242 1/8
2 1/2 - 46206206206206206209209209202 5/8 - 4 1/8
56206206206209209209205 1/8
6 -76206206206209169169166 1/8
8 - 109169169169169169168 1/8 - 10 1/8
12 - 1812161216121612161216121612 1/8
20 - 24181618161816181618161816
TABLE II "B" = gauge of sheet metal jacket (bottom jacket approx. 2 X ga. or top jacket)
Top