C2000 through C2030 Pre-Insulated Pipe Anchor Installation Instructions

c2000-c2030 1

Installation Steps

1. Position and slide anchor support between the center line of the pipe and the support member.

2. Weld the anchor support to the support member and to the pipe as shown (see Table 1 below for weld sizes and desired location).

C2000-C2030 Installation Instruction_1  C2000-C2030 Installation Instruction_3  C2000-C2030 Installation Instruction_4

 

Table 1
Pipe Size
C2000 Series
C2010 Series
C2020 Series
C2030 Series
W1 Size
W2 Size
W1 Size
W2 Size
W1 Size
W2 Size
W1 Size
W2 Size
8″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
10″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
12″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
14″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
16″ 3/16″ 3/16″ 3/16″ 3/16″
18″ 3/16″ 3/16″
20″ 3/16″ 3/16″
24″
26″
28″
30″
36″
42″
Top