C1000 through C1030 Pre-Insulated Welded Pipe Anchor Installation Instructions

c1000-c1030 pipe welded anchor 2

 

Installation Steps

1. Position and slide anchor support between the center line of the pipe and the support member.

2. When properly positoned, weld the anchor support to the support member and to the pipe as shown (see Table 1 below).

 

Table 1
Pipe Size
C1000 Series
C1010 Series
C1020 Series
C1030 Series
W1 Size
W2 Size
W1 Size
W2 Size
W1 Size
W2 Size
W1 Size
W2 Size
2″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
3″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
4″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
6″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″ 3/16″
8″ 3/16″ 3/16″ 3/16″ 3/16″
10″ 3/16″ 3/16″ 3/16″ 3/16″
12″ 3/16″ 3/16″ 3/16″ 3/16″
14″ 3/16″ 3/16″
16″ 3/16″ 3/16″
18″
20″
24″
26″
28″
30″
36″
42″
Top