PT&P fabricated 1,328 hold-down pipe clamp assemblies for insulated pulsating gas pipelines. They are fabricated from carbon steel and designed with PTFE slide plates and kinetics-vibroisolating pads. The hold-downs are designed for 2″ to 8″ diameter plipes and operating temperatures ranging from -20°F to 750°F.
Live New Webinar
Sign-up for a Live Technical Webinar…
Engineered Spring Supports (Practical, Hands-on Approach) Webinar
Date: Thursday, August 5, 2021 – Register for 10:00 am or 2:00 pm
*Note: Time Zone is CDT * Central Daylight Savings Time / GMT -5h
Live Webinars are worth 1 PDH Credit for TX Professional Engineers
Learn how the theoretical applications of spring supports are put into use in the real world. We will start with a review of the working principles of both variable and constant springs. See how brand new spring looks at delivery, and review installation guidelines. Learn the key points to review through the total installation process and subsequently when the springs are in operation. See how to determine if springs need adjustments, re-calibration, refurbishment, or replacement. View in field examples, shutdown, and isolation procedures. See the selection process required when there are significant changes to the operating condition.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits