Insulated Pipe Support - Heavy Duty with Load Bearing Plate - A7000 - Details
Request A Quote
Pipe Shields Inc. manufactures pre-insulated pipe supports, slides, guides and anchors and is a subsidiary of Piping Technology and Products, Inc.
Hardware Sold Separately – Note: For higher load ratings, see A7200. The load ratings represent average values obtained in accordance with accepted methods and are subject to normal manufacturing variations. Dimensions and ratings are subject to change without notice.
To develop maximum load rating, width of support surface should be at least 1/2 of dimension “B” in Table I.
Eliminates welding to pipe
Overlapping galvanized sheet metal jacket
Insulating structural inserts for load transfer
Minimizes heat loss and/or condensation
Load distribution plate integral with bottom jacket
Copper tubing sizes available
Other I.D.’s and/or O.D.’s available on request
Performance Test Results on File: Available upon request.
A7000: Applicable PSI spec. doc.: No. 205
Insulation: Calcium Silicate asbestos-free, treated with water repellant.
Jackets: Galvanized Steel ASTMA-527
Load Distribution Plate: Carbon Steel ASTM A-36
Coating: Primer coated or hot-dip galvanized
Glue: Industrial contact adhesive
Formal Submittal Sheets Available
Model A7000 is designed for use on:
Intended for Installation on:
Pipe Rolls, see A8200
Clevis Hangers, see A9000
Temperature Range: +40°F to +1200°F
Note: Up to 1800°F available upon request.
|Pipe Size||Maximum Load Rating (lb.)||A||B||C|
|On Flat Surface (a)|
|Oper. Temp°F||Mult. Factor "F"|