Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
  < Back to Pipe Anchors
Model C4300 - Insulated Positive Pipe Anchor
Download PDF
C4300 Insulated Positive Pipe Anchor

Dimensions and ratings are subject to change without notice.

The load ratings represent average values obtained in accordance with accepted test methods and are subjected to normal manufacturing variations.

Note: If thrust plate thickness "D" is greater than pipe wall thickness, consult factory.

Installation Instructions

Pipe Size
Load Rating
Insul Thk. = 2-1/2"
Insul Thk. = 3"
Insul Thk. = 4"
Vert. lb.
Axial lb.
B
C
D
E
B
C
D
E
B
C
D
E
1
1 1/2
910
1310
1360
1970
4
4
4
4.5
0.375
0.5
8
9
6
6
4.5
5.5
0.5
0.5
9
10
6
6
6.5
7.5
0.5
0.5
11
12.125
2
2 1/2
3
4
1640
1980
2420
3110
2460
2980
3620 4660
4
4
4
4
4.5
5.5
5.5
6.5
0.5
0.5
0.5
0.5
9
10
10
11
6
6
6
6
5.5
6.5
6.5
7.5
0.5
0.5
0.5
0.5
10
11
11
12.125
6
6
6
6
7.5
8
8
9
0.5
0.625
0.625
0.625
12.125
13.125
13.125
14.125
5
6
8
10
3840
4570
5950
7420
5760
6860
8930
11130
4
4
6
6
7.5
8
9.5
11
0.5
0.5
0.5
0.5
12.125
13.125
15.375
17.375
6
6
6
6
8
9
10.5
12
0.5
0.625
0.625
0.625
13.125
14.125
16.375
18.375
6
6
6
6
9.5
10.5
12
13
0.625
0.625
0.625
0.625
15.375
16.375
18.375
20.375
12
14
16
18
8800
10000
11600
12800
13200
15000
17400
19200
6
6
6
6
12.5
13
14.5
16
0.5
0.5
0.5
0.5
19.625
20.625
22.625
24.625
6
6
6
6
13
14
15.5
16.5
0.625
0.625
0.625
0.625
20.625
21.625
23.625
25.625
6
6
8
8
14.5
15.5
16.5
18
0.625
0.625
0.625
0.625
22.625
23.625
25.625
27.625
20
24
30
36
42
13600
14400
18800
22000
24800
20400
21600
28200
33000
37200
6
6
6
6
6
17.5
20.5
24.5
28.5
33
0.5
0.5
0.5
0.5
0.5
26.625
30.625
37.125
43.125
49.125
6
6
6
6
6
18
21
25
29.5
33.5
0.625
0.625
0.625
0.625
0.625
27.625
31.625
38.125
44.125
50.125
8
8
8
8
8
19.5
22.5
26.5
31
35
0.625
0.625
0.625
0.625
0.625
29.625
33.625
40.125
45.125
52.125

 

Application:

Models C4300 through C4330 are designed for use on:

  • Cold Water
  • Hot Water
  • Chilled Water
  • Dual Temperature
  • Steam
  • Air
  • Gas
  • Vacuum
  • Where large axial forces must be resisted

Intended for Installation on:

  • Flat Surfaces

Temperature Range: +40°F to +1200°F

Features

  • All pipe sizes
  • Easy Installation
  • Overlapping galvanized sheet metal jacket
  • Insulating structural inserts for load transfer
  • Other I.D.'s and/or O.D.'s available on request
  • Bottom-of-pipe to top-of-shield matches insulated supports in "B" series

Performance Test Results on File: Available upon request.

Material Data:

  • C4300 - C4330: Applicable PSI spec. doc.: No. 209
  • Steel Inner Thrust Plates (supplied loose):
  • Model C4300: A36 Carbon Steel
  • Model C4310: A387GR.22 Chrome Moly
  • Model C4320: A515GR.70 Carbon Silicon
  • Model C4330: A304L Stainless Steel
  • Jackets: Galvanized Steel ASTM-527
  • Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant
  • Glue: Industrial contact adhesive
  • Steel Straps/Base: Carbon Steel ASTM A-36
  • Fasteners: ASTM A-307 Plated
  • Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available

     

 

 

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy