Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

  
Call Us: (800) 538-7007   Se habla español
  

 
  < Back to Pipe Anchors
Model C4100 - Insulated Positive Pipe Anchor
Download PDF
C4100 Insulated Positive Pipe Anchor

Dimensions and ratings are subject to change without notice.

The load ratings represent average values obtained in accordance with accepted test methods and are subjected to normal manufacturing variations.

Note: For higher load ratings, see: C4200. If thrust plate thickness "D" is greater than pipe wall thickness, consult factory.

Installation Instructions

Pipe Size
Load Rating
Insul Thk. = 1-1/2"
Insul Thk. = 2"
Insul Thk. = 2-1/2"
Insul Thk. = 3"
Insul Thk. = 4"
Vert. lb.
Axial lb.
B
C
D
E
B
C
D
E
B
C
D
E
B
C
D
E
B
C
D
E
1
1 1/2
400
580
640
930
4
4
2.5
2.5
0.25
0.25
5.375
5.875
4
4
3
4
0.25
0.25
6.437
7.5
4
4
4
4.5
0.25
0.3125
7.5
8.5
6
6
4.5
5.5
0.25
0.3125
8.5
9.5
6
6
6.5
7.5
0.3125
0.3125
10.5
11.625
2
2 1/2
3
4
720
870
1060
1680
1160
1410
2400 2900
4
4
4
4
3
4
4
4.5
0.25
0.25
0.3125
0.3125
6.4375
7.5
7.5
8.5
4
4
4
4
4
4.5
4.5
5.5
0.25
0.25
0.3125
0.3125
7.5
8.5
8.5
9.5
4
4
4
4
4.5
5.5
5.5
6.5
0.3125
0.3125
0.375
0.375
8.5
9.5
9.5
10.5
6
6
6
6
5.5
6.5
6.5
7.5
0.3125
0.3125
0.375
0.375
9.5
10.5
10.5
11.625
6
6
6
6
7.5
8
8
9
0.3125
0.375
0.5
0.5
11.625
12.625
12.625
13.625
5
6
8
10
2100
2550
3400
4000
3400
3900
4850
5850
4
4
4
4
5.5
6.5
8
9.5
0.3125
0.3125
0.3125
0.3125
9.5
10.5
12.625
15.125
4
4
4
4
6.5
7.5
9
10.5
0.3125
0.3125
0.3125
0.3125
10.5
11.625
13.625
16.125
4
4
6
6
7.5
8
9.5
11
0.375
0.375
0.375
0.375
11.625
12.625
14.875
17.125
6
6
6
6
8
9
10.5
12
0.375
0.375
0.375
0.375
12.625
13.625
15.875
18.125
6
6
6
6
9.5
10.5
12
13
0.5
0.5
0.5
0.5
14.875
15.875
17.875
20.125
12
14
16
18
4400
5000
5800
6400
6800
7350
8320
9240
4
4
4
4
11
12
13
14.5
0.3125
0.3125
0.3125
0.3125
17.125
18.125
20.125
22.125
4
4
6
6
12
12.5
14
15.5
0.3125
0.3125
0.3125
0.3125
18.125
19.125
21.125
23.125
6
6
6
6
12.5
13
14.5
16
0.375
0.375
0.375
0.375
19.125
20.125
22.125
24.125
6
6
6
6
13
14
15.5
16.5
0.375
0.375
0.375
0.375
20.125
21.125
23.125
25.125
6
6
8
8
14.5
15.5
16.5
18
0.5
0.5
0.5
0.5
22.125
23.125
25.125
27.125
20
24
30
36
42
6800
7200
9400
11000
12400
10200
12000
14900
17750
20500
4
4
6
6
6
16
19
23
27.5
31.5
0.3125
0.3125
0.3125
0.3125
0.3125
24.125
28.125
34.375
40.375
46.375
6
6
6
6
6
16.5
19.5
24
28
32.5
0.3125
0.3125
0.3125
0.3125
0.3125
25.125
29.125
35.375
41.375
47.375
6
6
6
6
6
17.5
20.5
24.5
28.5
33
0.375
0.375
0.375
0.375
0.375
26.125
30.125
36.375
42.375
48.375
6
6
6
6
6
18
21
25
29.5
33.5
0.375
0.375
0.375
0.375
0.375
27.125
31.125
37.375
43.375
49.375
8
8
8
8
8
19.5
22.5
26.5
31
35
0.5
0.5
0.5
0.5
0.5
29.125
33.125
39.375
45.375
51.375

 

Application:

Models C4100 through C4130 are designed for use on:

  • Cold Water
  • Hot Water
  • Chilled Water
  • Dual Temperature
  • Steam
  • Air
  • Gas
  • Vacuum
  • Where large axial forces must be resisted

Intended for Installation on:

  • Flat Surfaces

Temperature Range: +40°F to +1200°F

Features

  • All pipe sizes
  • Easy Installation
  • Overlapping galvanized sheet metal jacket
  • Insulating structural inserts for load transfer
  • Other I.D.'s and/or O.D.'s available on request
  • Bottom-of-pipe to top-of-shield matches insulated supports in "B" series

Performance Test Results on File: Available upon request.

Material Data:

  • C4100 - C4130: Applicable PSI spec. doc.: No. 209
  • Steel Inner Thrust Plates (supplied loose):
  • Model C4100: A36 Carbon Steel
  • Model C4110: A387GR.22 Chrome Moly
  • Model C4120: A515GR.70 Carbon Silicon
  • Model C4130: A304L Stainless Steel
  • Jackets: Galvanized Steel ASTM-527
  • Structural Inserts: High-density calcium silicate asbestos-free, treated with water repellant
  • Glue: Industrial contact adhesive
  • Steel Straps/Base: Carbon Steel ASTM A-36
  • Fasteners: ASTM A-307 Plated
  • Coating: Primer coated or hot dipped galvanized. Other coatings available upon request.

Formal Submittal Sheets Available
     

 
 

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy