Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
 

Frequently Asked Questions

Why are there so many models of insulated pipe supports?

The load rating of each support is often dependent upon how the support is mounted (flat surface, roller, clevis hanger). Heavy valve loads, wind loads, and/or thermal loads may have to be accommodated. Provision for axial and/or lateral travel, due to thermal growth, may have to be made. The pipe may require guiding or restraint. Supports mounted on 10'-0 centers do not require the load carrying capability that is required by supports on 40'-0 centers. These and other considerations resulted in the creation of a family of insulated pipe supports enabling the customer to select the most economic unit sufficient for the purpose intended. For more information on our models, visit our Selection Guide.

b1000 insulated pipe support

Sliding Insulated Pipe Support- Base Mounted

 

Back to FAQ main page

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy