Pipe Shields

   Manufacturers of insulated pipe supports, hot shoes and cold shoes since 1971

 
Call Us: (800) 538-7007   Se habla español
 

 
 

Frequently Asked Questions

Why can't I specify pipe supports the "old way"?

Weld-on supports represent heat sink conditions with resulting energy loss. Expensive like materials, welding and inspection procedures are often required on high temperature alloy steel pipe to minimize the likelihood of stress corrosion and to assure a sound weld. Available standard catalog hangers may not permit the maximization of support spacing and the resulting minimization of the number of supports required on the job - possible with the use of pre-insulated pipe supports. Today's light density fiberglass insulation has insufficient compressive strength to support most pipe loads without crushing out - often requiring the contractor to be innovative at each support point. Load rated insulated pipe supports offer an appropriate and economic solution.

Welded Insulated Pipe Anchor

Welded Insulated Pipe Anchor

Back to FAQ main page

 

 

Parent Company: Piping Technology: Pipe Supports, Pipe Clamps, & Pipe Hardware
Fellow Subsidiaries
U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds

Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling
: Snubbers, Sway Struts & Sway Braces
Contact Us: 707-447-5014 Toll Free1-800-538-7007. info@pipeshields.com

Copyright 2018 Pipe Shields, Inc. All Rights Reserved. Contact Us | Privacy Policy